Homepage | what does that do? | Common Faults | Questions Answered | < a href="Manu_website.html">Manufacturers |

MODULE NUMBER C00201512

Configuration information for

Hotpoint

FEW10, FEW10(cold fill)--FEW12, FEW12(cold fill)

 

  1. Start with the selector at 'Off'
  2. Turn the selector to 'K' while pressing 'Rinse Hold ' & 'Energy Save '. Continue holding the buttons for a count of 5.
  3. The 'Rinse Hold ', 'Energy Save ' & 'Active' LEDs will now start flashing.
  4. Press 'Start' for a count of 2 and all LEDs will go out. This confirms the module configuration program has been started.
  5. Choose your model from the list below and turn the selector to the first code letter for your model.
  6. Touch the 'Start' button and the 'Rinse Hold ' LED lights to accept the code.
  7. Turn the selector to the second code letter for your model.
  8. Touch the 'Start' button and the 'Energy Save ' LED lights to accept the code.
  9. Turn the selector to the third code letter for your model.
  10. Touch the 'Start' button and the 'Rinse Hold ' & 'Energy Save' LEDs light to accept the code.
  11. Turn the selector to the fourth code letter for your model.
  12. Touch the 'Start' button and the 'Energy Save ' LED lights up while the 'Rinse Hold ' LED flashes to accept the code.
  13. Slowly rotate The control Knob clockwise through all 15 positions, pausing at each one to note the condition of the 'Door Locked ' LED, (write down if it is on or off), Check the final sequence against the configuration chart for your model, if it does not correspond then re-do the whole set-up again. Once the correct configuration has been achieved turn the dial back to 'Off' and the machine will work properly next time it is switched on.

 

Model numbers and code letters

         

  CODE 1 CODE 2 CODE 3 CODE 4
FEW10 M P A A
FEW10 (cold fill) K E A A
FEW12 B C B A
FEW12 (cold fill) P G A A

 

 

Configuration Chart

RED = ON         WHITE = OFF

 

 

Machine Number
A B C D E F G H J K L M N P Q
FEW10
                             
FEW10 (cold fill)
                             
FEW12
                             
FEW12 (cold fill)