Homepage | what does that do? | Common Faults | Questions Answered | Manufacturers |

MODULE NUMBER C00199331

Configuration information for

CREDA

WMA30PE, WMA31PE, WMA32PE & WMA33PE

 

Before any attempt at reconfiguring this appliance first make sure the top is on and secure (for safety reasons) and that the door is closed with the mains power switched ON

  1. Start with the selector at 'O'  (off)
  2. Turn the selector to 'K' while pressing 'Super Rinse' & 'Rinse Hold'. Continue holding the buttons for a count of 5.
  3. The 'Super Rinse', 'Rinse Hold' & 'Rinse & Spin' LEDs will now start flashing.
  4. Press 'Start' for a count of 2 and all LEDs will go out. This confirms the module configuration programme has been started.
  5. Choose your model from the list below and turn the selector to the first code letter for your model.
  6. Touch the 'Start' button and the 'Super Rinse' LED lights to accept the code.
  7. Turn the selector to the second code letter for your model.
  8. Touch the 'Start' button and the 'Rinse Hold' LED lights to accept the code.
  9. Turn the selector to the third code letter for your model.
  10. Touch the 'Start' button and the 'Super Rinse' & 'Rinse Hold' LEDs light to accept the code.
  11. Turn the selector to the fourth code letter for your model.
  12. Touch the 'Start' button and the 'Rinse Hold' LED lights up while the 'Super Rinse' LED flashes to accept the code.
  13. Turn selector knob back to 'A' (anti clockwise), then slowly rotate it clockwise through all 15 positions, pausing at each one to note the condition of the 'Final Spin' LED, (write down if it is on or off), Check the final sequence against the configuration chart for your model, if it does not correspond then re-do the whole set-up again. Once the correct configuration has been achieved turn the dial back to 'O' (off) and the machine will work properly next time it is switched on.

 

Model numbers and code letters

         

  WMA30PE WMA31PE WMA32PE WMA33PE
CODE 1 A D F
CODE 2 FAST SPIN J B
CODE 3 RINSE & FAST SPIN RINSE & FAST SPIN E E
CODE 4 D D E E

 

 

Configuration Chart

RED = ON         WHITE = OFF

 

 

MODEL NUMBER A B C D E F G H J K L Rinse & fast spin Rinse & slow spin Fast spin Slow spin
WMA30PE                              
WMA31PE                              
WMA32PE                              
WMA33PE